How to Cut Picture Frame Molding: A Beginner’s Guide to Perfect Frames

In this article, we will walk you through the step-by-step process of cutting picture frame molding. Whether you’re a DIY enthusiast or a beginner looking to add a personal touch to your home decor, this guide is for you, Reader With a few simple tools and some basic woodworking skills, you’ll be able to create beautiful and professional-looking frames in no time. So let’s dive in and unlock the secrets of picture frame molding!

how to cut picture frame molding

Tools You’ll Need

Before we get started, let’s make sure you have all the necessary tools for this project:

  • Miter saw or miter box with a hand saw
  • Measuring tape
  • Pencil
  • Mitre trimmer or coping saw
  • Sanding block or sandpaper
  • Wood glue
  • Clamps
  • Nail gun or hammer and finish nails
  • Miter gauge

Once you have gathered all the required tools, we can move on to the next steps.

Measuring and Cutting the Molding

Now that you have your tools ready, it’s time to measure and cut the molding for your picture frame. Follow these steps:

  1. Measure the dimensions of your picture or artwork that you want to frame. Add an extra inch to each measurement to allow for the overlap of the molding.
  2. Using your miter saw or miter box, set the angle to 45 degrees. This is the standard angle for most picture frame moldings.
  3. Place the molding flat on the saw table, with the back facing up. Align the inside edge of the molding against the saw fence.
  4. Hold the molding firmly in place and make your first 45-degree cut. Remember to cut the molding at a 45-degree angle in the opposite direction for the other end of the frame.
  5. Repeat this process for the remaining sides of the frame, ensuring that all the angles are cut correctly and match up at the corners.

Once all the pieces are cut, dry fit them together to ensure that they fit properly and the corners align perfectly. If adjustments are needed, use a miter trimmer or coping saw to fine-tune the angles. Sand any rough edges or imperfections with a sanding block or sandpaper.

Assembling and Finishing the Frame

Now that you have cut the molding pieces, it’s time to assemble and finish your picture frame:

  1. Apply a thin, even layer of wood glue to the mitered ends of the molding.
  2. Join the corners of the frame together and use clamps to hold them firmly in place. Wipe away any excess glue with a damp cloth.
  3. If you have a nail gun, use it to secure the corners with finish nails. Alternatively, you can use a hammer and finish nails. Countersink the nails slightly and fill the holes with wood filler.
  4. Allow the glue to dry completely, following the manufacturer’s instructions. Once dry, remove the clamps.
  5. Sand the entire frame to smooth out any rough spots or imperfections. Wipe away any dust with a dry cloth.
  6. Apply a coat of paint or stain to your frame, following the manufacturer’s instructions. Let it dry completely before handling.

And there you have it, Reader! You have successfully cut and assembled your own picture frame molding. Now it’s time to display your artwork in style.


Learning how to cut picture frame molding opens up a world of possibilities for adding a personal touch to your home decor. With a few simple tools and some patience, you can create beautiful and professional-looking frames that will showcase your favorite artwork or memories. Remember to take your time, measure accurately, and practice your cutting skills. And don’t forget to have fun and get creative with different molding styles and finishes. Happy framing, Reader!

If you enjoyed this article on picture frame molding, don’t forget to check out our other articles on home improvement, DIY projects, and crafts. We have a wealth of resources to inspire and guide you on your creative journey. Happy crafting!

Related posts

Leave a Reply

Your email address will not be published. Required fields are marked *